铜门的制作方法：
Manufacturing method of copper door:
1、根据现场实际尺寸，用方钢焊接框架，接口处采用满焊处理，外扣铜板型材焊接而成。
1. According to the actual size of the site, the frame is welded with square steel, the interface is fully welded, and the external buckle copper plate profile is welded.
2、铜板的制作方法为：剪裁→折弯→人工拉丝→化学氧化→清洗→自然晾干→喷涂保护层（专用清漆）→高温烘箱烘烤（160℃-220℃）。
2. The production method of copper plate is: cutting → bending → artificial drawing → chemical oxidation → cleaning → natural air drying → spraying protective layer (special varnish) → baking in high temperature oven (160 ℃ - 220 ℃).
3、铜门框架的制作方法为：选材→切割→焊接→打磨→防腐防锈处理→切边戳磨→铜焊粘贴及覆盖。
3. The manufacturing method of the copper door frame is: material selection → cutting → welding → grinding → anti-corrosion and anti rust treatment → edge cutting and grinding → brazing, pasting and covering.
4、安装玻璃时玻璃与铜板接口处采用玻璃胶密封处理，玻璃与方定网站建设  伺服液位仪  防撞墙模具 唐山护栏 遮阳网 风电基础模具钢接口处用专用防撞条垫底。
4. When installing glass, the interface between glass and copper plate shall be sealed with glass glue, and the interface between glass and square steel shall be padded with special anti-collision strip.
5、门扇的安装：根据门框的位置，在地面上找出相应的位置固定地弹簧，然后安装铜门扇。
5. Installation of door leaf: according to the position of door frame, find out the corresponding position on the ground to fix the ground spring, and then install the copper door leaf.
6、安装铜门标准：铜门与铜门、门框之间的缝隙小于与等于8mm，铜门与铜门之间平整度不大于2mm。
6. Standard for installation of copper door: the gap between the copper door and the copper door, the door frame is less than or equal to 8mm, and the flatness between the copper door and the copper door is not more than 2mm.